Forum (https://forum.milwaukee-vtwin.de/index.php)
- Modelllinien (https://forum.milwaukee-vtwin.de/board.php?boardid=17)
-- V-Rod, Night Rod, Street Rod, Muscle (Revolution) (https://forum.milwaukee-vtwin.de/board.php?boardid=4)
--- Sissybar-Polster demontieren (https://forum.milwaukee-vtwin.de/threadid.php?threadid=57274)
Sissy Bar Polster demontieren
Hallo,
ich hab mir endlich die Sissy Bar (Artikel-Nummer 52300016) gegönnt, würde aber gerne noch das Metall schwarz machen (lassen). Sind die Polster geklebt, hat die schon einer mal runter gemacht?
Wäre für sachdienliche Hinweise dankbar!
Gruß,
Patrik
Keiner? Alle im Winterschlaf?
Kann doch nicht sein, dass das noch nie einer gemacht hat (grumml) .....
ne... hat noch keiner runtergeferkelt. ich hab die kleine schmale dran und die sieht auch nach umbau und neuer sitzbank noch gut aus.
__________________
Der Gott, der Eisen wachsen ließ, der wollte keine Plastik-Motorräder
Vielleicht hilft dir der link ins US Forum weiter.
Zitat:
1) remove the sissy bar from the bike and removed the pad from sissy bar.
2) Remove the little staples that hold the leather on the bottom of the pad and remove the leather from the pad.
3) The pad inside the leather is basically made up of 2 pieces; 1) the plastic back plate and 2) the foam pad (there is also a plastic wrap to protect the pad).
__________________
When your chopper is broken you fix it. When you are broken your chopper fixes you.
Aber ich seh gerade, du hast das neuere Modell, da weiß ichs leider nicht.
__________________
When your chopper is broken you fix it. When you are broken your chopper fixes you.
Tja leider - trotzdem Danke!
Hi und servus,
ich hab auch die Sissybar mit dieser Art-Nr und würde sie gerne neu polstern lassen.
Lieder weiss ich nicht wie die Polsterung zu entfernen ist.
Weiss hier jemand wie sich die Dinger entfernen lassen ohne das etwas kaputt geht?
Danke schon mal für die Antwort.
__________________
Before Elvis there was nothing.
John Lennon