Forum (https://forum.milwaukee-vtwin.de/index.php)
- Modelllinien (https://forum.milwaukee-vtwin.de/board.php?boardid=17)
-- Sportster (Evolution 883 / 1100 / 1200) (https://forum.milwaukee-vtwin.de/board.php?boardid=6)
--- Vance & Hines Fuelpak für EFI-Modelle (https://forum.milwaukee-vtwin.de/threadid.php?threadid=44909)


Geschrieben von schupp am 19.07.2018 um 08:14:

Danke
probiere ich heute Abend mal aus.


Geschrieben von schupp am 20.07.2018 um 05:45:

Habe gestern mal eine Mail an V&H geschrieben, heute morgen bekomme ich die Antwort.
Jetzt verstehe ich nicht mehr:


This Fuelpak has not yet been used to flash your bike. You need to go to 'map lookup' while connected and flash the base map for your exhaust system. Once that's done, run the map for 2-3 tanks of fuel before considering Autotune. 



AUTOTUNE INSTRUCTIONS (only use if needed after 1-2 tanks of fuel with Base Map)

**Be advised that while Autotune is active the bike will not perform optimally. The AFR table is not optimized, and the cranking fuel/accel enrichment are turned off. This may translate into poor cold start performance, erratic idle, poor throttle response, and general ride quality issues. These will resolve once you ‘Finish’ the Autotune. Letting the bike fully warmup before riding while Autotune is active will help to slightly diminish some of these symptoms. 


1) Go to the Autotune tab in the main menu of the app.


2) a  base map from which to start ( whichever slot your correct map is in, most likely slot 1 if this is a brand new FP3.


3) ‘Quick Setup'


4) It will have you flash the bike to run Autotune, follow the in app instructions (i.e. bike off for 30 seconds, etc.)


5) Once Autotune is active, you'll want to break it down into 3 sessions, approx. 20-30 minutes each.


6) After your first 20-30 minute session, open the app and go into the Autotune section. 'Apply Learned Values' and 'Apply'. This will take the data learned and store it, allowing for more data to be collected.


7) After the second 20-30 minute session do the same thing - ‘Apply Learned Values’ and then ‘Apply'. 


cool After the 3rd total session, 'Apply Learned Values’ and then 'Finish'. This will complete the Autotune, taking everything learned from each 'Apply' and will build the map/put it into a new slot. 
 


Geschrieben von Tupapupa am 20.07.2018 um 05:55:

Was verstehst du nicht? Ist doch alles prima beschrieben.

Anschliessen, updaten und registrieren (heiraten) ist eins, passendste Map downloaden, flashen (macht er autom. auf Platz 2, Original wird gesaved), Autotune 2 Tankfüllungen lang, dabei mehrfach flashen, fertig.

 

__________________
...


Geschrieben von schupp am 20.07.2018 um 05:58:

Sorry, hätte ich dazu schreiben müssen.
Die Autotune-Fahrt habe ich schon längst gemacht.
Ich wollte, dass V&H die Autotune-Map sich mal anschaut....


Geschrieben von Aymara am 20.07.2018 um 06:42:

zum zitierten Beitrag Zitat von schupp
Sorry, hätte ich dazu schreiben müssen.
Die Autotune-Fahrt habe ich schon längst gemacht.
Ich wollte, dass V&H die Autotune-Map sich mal anschaut....

Dann antworte denen doch entsprechend Augenzwinkern  ... und frage nach, wie sie auf diese Aussage kommen : "This Fuelpak has not yet been used to flash your bike."

PS: Haste denn nach Autotune auch geflashed?

__________________
Gruß

Chris


Geschrieben von schupp am 20.07.2018 um 06:47:

Klar, fahre schon seit Wochen mit der Autotune map.


Geschrieben von Aymara am 20.07.2018 um 07:06:

zum zitierten Beitrag Zitat von schupp
Klar, fahre schon seit Wochen mit der Autotune map.

Ja, wie gesagt ... am besten dem Support antworten und genau erklären, wie Du bislang vorgegangen bist.

__________________
Gruß

Chris


Geschrieben von Mondeo am 20.07.2018 um 10:31:

Was für ein Ziel verfolgst du damit?


Geschrieben von schupp am 20.07.2018 um 16:35:

Ich wollte V&H mal über meine Autotune Map schauen lassen, ob hier noch etwas verbessert werden kann!


Geschrieben von Staude am 20.07.2018 um 17:28:

Glaub nicht das sich die hier groß Mühe geben. Genau die gleiche Antwort hab ich vor vier Wochen auch bekommen, wollte zwar nur die Grundmap von denen wissen aber sieht schwer nach Copy & Paste aus..

__________________
Grüße Staude

Mein Sporty-Projekt


"Meine Definition von Glück?
Keine Termine und leicht einen Sitzen"
Harald Juhnke
 


Geschrieben von Mondeo am 22.07.2018 um 15:09:

Ich denke da antwortet ein Computer großes Grinsen


Geschrieben von govidaris am 27.07.2018 um 20:05:

Was stelle ich mit Auto compression Release ein. Bei mir ist das auf off

__________________
Harley Davidson (Fehlercodes) DTC - Google Play apk 


Geschrieben von Ritchy059 am 27.07.2018 um 20:22:

Ich würde sagen - Dekompressionventile on/off
 

__________________
„Tut das Not, dass das hier so rumoxidiert?"


Geschrieben von govidaris am 27.07.2018 um 20:28:

D. H. Bei meiner 48?  Auf on oder offverwirrt

__________________
Harley Davidson (Fehlercodes) DTC - Google Play apk 


Geschrieben von Ritchy059 am 28.07.2018 um 00:33:

Hat Du Dekompressionsventile - vermutlich nicht - dann Off!

__________________
„Tut das Not, dass das hier so rumoxidiert?"