Mmmh, seltsam. Kann man bei deinem Modelljahr schon Trouble Codes auslesen. Bis 2003 ging das so:
Speedo Checks ('03 and earlier):
press the odometer switch in while turning the ignition on (with the run switch engaged)
d01 is the Speed sensor output shorted low,
d02 is Speed sensor power output shorted high or open,
d03 and d04 are not used,
d05 is Speed sensor return shorted high,
d06 is Speed sensor return shorted low,
d07 not used,
d08 is Speedometer power overvoltage,
d09 is Speed output shorted high and
d10 is Speed output shorted low or open.
If the code has CLr added (d01CLr) which means clear no problems
The CAL 03 will be the last one Calibration 3=Domestic.
Ich weiß aber nicht, ab wann das eingeführt wurde.
__________________
When your chopper is broken you fix it. When you are broken your chopper fixes you.
