Zitat von Auspuffoptimierer
wenn ich dann nochmal drücke steht PSSPt drin, dann kommt die Angst ich verstell irgendwas was ich nicht mehr rückgängig machen kann....
Wieso, machst doch alles richtig!
1- Turn Ignition switch to OFF & Run/Stop switch is to Run.
2- Push odometer reset button in & hold.
3- Turn ignition switch to Ignition and release the odometer reset button. Background lighting sould illuminate, sppedometer needle should sweep its full range and indicator lamps (battery, security, low fuel, check engine and cruise) should illuminate. The word “diag” should then appear.
4 -
Push the odometer reset button once and you will see the ion menu "PSSPt" with the first P flashing.
5 - Each letter represents an area of the diagnostics module. The module that is flashing is the one you are going to check. To move from one letter (module) to the next, you push the odometer reset button one time. (from P to S to SP to t and back to P, etc.)
P = ECM/ICM (Electronic Control Module) [EFI] / Ignition Control Module [Carbureted])
S = TSM/TSSM (Turn Signal/ Security Module)
SP = speedometer
T = tachometer
Weiteres siehe
Quelle
(Oder in unserer FAQ Ecke)
__________________
When your chopper is broken you fix it. When you are broken your chopper fixes you.
Dieser Beitrag wurde schon 1 mal editiert, zum letzten mal von George am 27.07.2014 13:07.