Ich habs (Zitat):
Since a lot of people have asked about the fairing on my bike, I figured that I would share the info that I have for the parts that it took me to install what you see on my bike. I didn't know where to post the info since its not really a How To but rather just an informative post, so if someone wants to move it, great.
In addition to installing the fairing as is, I plastic welded Ballast Mount brackets on the inside to hold my HID ballast and had it Textured when it was sprayed
The fairing itself is a Bob Dron Fairing. It is available through a bunch of vendors; Arlen Ness, Drag Specialities, but the cheapest price that I found was from a vendor on Ebay.
FAIRING
For that low look here is a lower headlight mount bracket to drop the headlight. Pricey, I however have Rizoma Triples and used a $35 Headwinds mount that I drilled & tapped myself
HEADLIGHT MOUNT
Give me credit for putting one on a V-rod, however I got the mounting idea here:
MOUNTING INSTRUCTIONS
The Memphis Shades Kit that I used to mount it is Memphis Shades P/N 2320-0033. That is the whole kit, however you really only need:
These are the P/N for the fork mount brackets only and am not sure that they sell them individually.
4 ea – M520
4 ea – M533
Mount Kit P/N’s found here:
MOUNTING HADWARE
The Fairing is made for a Road King so it is a bit wider than the V-Rod front end. I used aluminum spacers to space it out for an easier fit:
ALUMINUM SPACERS
I also added Black Aluminum hardware for the kit that I bought here (also have bought all of my Titanium Fasteners here too):
BLACK ALUMINUM BOLTS
3 ea – Black Buttonhead M6X20 bolts
2 ea – Black Buttonhead M6X35 bolts
5 ea – Black M6 Nuts
5 ea – Black M6 Washers
2 ea – Black Sockethead M8X30 bolts
2 ea – Black M8 Washers
2 ea – Black Nuts
Schließlich habe ich es als erster geklaut 
, das war ein anderes Forum 
