Zitat von Mos
Die Faty ist von 1999. Gab's da überhaupt schon die Möglichkeit, Fehler auszulesen?
Obs 99 schon so war, weiß ich jetzt nicht mit Bestimmtheit. Es ist aber einen Versuch wert und evtl. bekommst du einen Hinweis darauf, welcher Sensor dir Probleme bereitet.
So geht's bei den frühen Diagnosen-Modellen:
Tachoknopf drücken während du die Zündung schaltest (Killschalter muss auf Run stehen).
Das hab ich mal aus einem US Forum aufgeschnappt (steht auch in unseren FAQ).
DTC Speedo Codes 03 and Earlier
Here are some trouble codes that can be accessed with your speedo on 03 and older models.
Information
Speedo Checks ('03 and earlier):
press the odometer switch in while turning the ignition on (with the run switch engaged)
d01 is the Speed sensor output shorted low,
d02 is Speed sensor power output shorted high or open,
d03 and d04 are not used,
d05 is Speed sensor return shorted high,
d06 is Speed sensor return shorted low,
d07 not used,
d08 is Speedometer power overvoltage,
d09 is Speed output shorted high and
d10 is Speed output shorted low or open.
If the code has CLr added (d01CLr) which means clear no problems
The CAL 03 will be the last one Calibration 3=Domestic.
__________________
When your chopper is broken you fix it. When you are broken your chopper fixes you.
Dieser Beitrag wurde schon 1 mal editiert, zum letzten mal von George am 14.03.2014 01:50.