If any of the switches are held or stuck for over two minutes with the IGN ON, the stuck switch code will set for that switch.
The engine stop is either in the run or the stop position. If the RHCM does not see either input or both inputs at the same time, DTC B2210 or B2212 will set.
For DTC B2262 and B2250 to be set, the vehicle has to be in operation for more than two minutes at speed above 30 mph (48 km/h). Historic codes may indicate the rider continually applies the brake to clutch. For example, coasting downhill with the clutch lever pulled in for more than two minutes will set codes.
Diagnostic Tips
Clear the DTCs and operate the vehicle to verify the DTCs are current. Stuck switch codes will take over two minutes to set.
Kupplung eventuell nicht richtig eingestellt, Kupplungschalter defekt ...
__________________
Zwischen dem, was wir sagen wollen, was wir denken, das wir sagen, dem was wir sagen, was wir hören, was wir hören wollen, und was wir verstehen, bestehen jede Menge Unterschiede.